The C-208 is loaded with double 8″ LF/MF and a single high energy HF driver. Each enclosure is constructed of high grade birch ply-wood and is custom fitted with steel fly hardware that has been test rated for a 7:1 static load, hanging up to 16 enclosures in a single array. Our user friendly hardware allows for hanging and ground stacking applications, permitting the user to stack up to six enclosures.
All C-208 enclosures are hand wired using premium 14 gauge wire and Neutrik brand NL8 connectors. All drivers are built with cast fame baskets for strength and longevity. Our compression drivers have replaceable titanium diaphragms for superb sound quality, performance and durability. We use a standard phase plug design to control the isophasic wave form as well as a wave guide system for smooth coverage and coupling. Our components are designed and built to a commercial standard and have a proven track record on tours ranging from stadiums to festivals of up to 30 shows per month with practically a nonexistent failure rate.
All C-208 enclosures are equipped with a removable back panel that can be disconnected and replaced by an internal TVi multi channel “Class D” power amplifier module. Each power amplifier has a built in multi-channel processor that has been chamber tuned for the C-208 to achieve a flat response curve with pre set limiters, DSP and crossover points. One amplified C-208 enclosure will also power one additional non-powered C-208 enclosure in tri amp mode by daisy chaining an NL8 cable.
My C-208 Loud speakers are in great condition, with minimal use. They have been refurbished to look and act as new, and work in all test cases.
|Biamp/Full-Range Switchable (NL4)||2×8″, 1×1.7″ diaphragm|
|Frequency Response (+/-3 dB)||90 Hz – 19 kHz|
|Program Power (watts)||LF-300, LF2-300, HF-130|
|RMS Power (watts)||LF-150, LF2-150, HF-65|
|SPL & Sensitivity (1w/1m)||126dB / 101dB|
|Coverage Angle||90 x 10 degrees|
|Nominal Impedance||Full-Range: 16Ohm, Biamp: HF 8ohm, LF 8ohm|
|Dimensions (HxWxD)||25.27″ x 13″ x 9.64/7.71″|
|Weight & Material||50.70 lbs 3/4″ birch plywood|
The C-208 is the perfect combination of ease of use, power efficiency and excellent sound quality. Each enclosure is constructed of high grade birch ply-wood and is custom fitted with industry standard steel fly hardware. Our hardware is built to be user friendly in both flown array and ground stacking applications. All of our hardware has been built and tested at a 10:1 static load factor allowing users to fly up to 16 C-208 line array elements on a single hang using our "A1" fly bar.
Our entire line array selection is hand wired using premium 14 gauge wiring. All of our drivers are built using a durable cast fame basket designed for longevity. Our compression drivers are built using replaceable titanium diaphragms for superb sound quality and performance. We use a standard phase plug to control the isophasic wave form as well as wave guide on many of our models. Our components have proven track record on tours ranging from stadiums to festivals of up to 30 shows per month with practically a nonexistent failure rate.
All C-110 enclosures are equipped with a removable back panel where the NL8 input/output connector is located. This back panel can be disconnected from the internal multi pin connector and quickly removed. In place of the passive back panel, our customers have the option to purchase and install our 3 channel digital switching amplifier module. The module can be quickly and easily connected, allowing for a seamless conversion from non-powered to a self powered array system. Each power amplifier module is capable of powering itself and one additional non-powered C-208 line array enclosures in tri-amp mode. The module is connected to the passive enclosure with a Neutrik NL8 connector. Each amplifier module is powered by "ICE" and offers an integrated active crossover system along with DSP correction that has been fine tuned in an anechoic chamber to provide the user with chambered flat response
As stated prior, the C-208 operates in tri-amp mode in which the C-208 enclosure is wired at 8 ohm for each mid frequency and 16 ohm for the high frequency component. In this mode (pin +1/-1) carries signal for mid-frequency one, (pin +2/-2) for the mid-frequency two and (pin +3/-3) carries signal for the high frequency. An external crossover is needed to separate the frequency range on all non-powered C-208 enclosures.
We pride ourselves in our product and service. TVi line array enclosures are conservatively rated. We test our products stringently and market them conservatively so that when the end user receives the product it amazes them every time. Our end goal is to offer our customers a product that will outperform our competitor's product watt for watt every time, without exceptions! Look no further, talk to our customers & experience the revolution!